Problem:
I’m getting my butt kicked; I have a Tech II scan tool with Saab v148.0 card in it. I have tried from Globaltis(Cracked) and TIS 2000 (Hardware key) but cannot gain security access.
Device:
I have a Tech II scan tool with Saab v148 from http://www.chinacardiags.com/wholesale/tech2-diagnostic-scanner-for-gm-saab-opel-suzuki-isuzu-holden-with-full-package.html
Error message:
Tis2000 gives me the error “cannot connect with security server”
Globaltis just says “error” when trying to gain security access.
I know it is communicating with the tech ii, because during the security check the tech goes from the home screen to “downloading”.
Laptop:
I am using a laptop with a TRENDnet TU-S9 USB to Serial Converter running XP SP3. I have java version 6 update 12 running.
Puzzle:
The only think I’ve noticed is the when starting globaltis it states “SAAB Automobile AB v146.00”. I have the 148 SAAB PCIAM card, do not know if that could be affecting it or not.
Advice/suggestion:
Very important.
Here in the forum (mhhauto.com) two types of SAAB v148.000 PCMCIA was shared
One for Tech2 hand held and one cracked for Tech2 Win
In Tech2 hand he'll only the one for its working
If its the right card uploaded in your tool card then go Security and do it
Try Java v 6.26
Its the best for GlobalTis or Java v7.0
Do you have it or not installed the SAAB v148.000 PCMCIA installed and can you connect to your SAAB car?
If not you can find this PCMCIA SAAB v148.000 for Tech2 hand held in the forum ( Not the one for Tech2win ) and use Card writer to flash you PCMCIA or MCE software
Or
use the advise of Mr. techamp (try to re-flash your Tech 2 PCIMA card with Globaltis so your hardware and software match. i believe version on globaltis is 146.00.) and use the SAAB GlobalTis to write your PCMCIA card
Then go to your card and check if the diagnostic is possible
Then connect again the Tech2 with the computer ->power it up ->run the GlobalTis-> use Security
Then you can do any SPS Programming in your car
Good luck
2019 Top Tech2 Diagnostic Scanner For GM/SAAB/OPEL/SUZUKI/ISUZU + CANDI +TIS2000 USBKEY + Carton Packing
2018年3月30日星期五
2018年3月29日星期四
ABS Bleed: using Tech II or VXDIAG VCX NANO GM
Should have my Tech II clone unit something this week, and will go through it with a fine tooth comb to see that is really needed.
On tech2win, although the op is stating that its working in 64 bit mode, really want to go through it to double check if it needs to run in win 7 compatible mode for everything to work "correctly" instead.
GDS2 is run in VM mode under a XP shell so that should be trouble free, but need to check out SDS to see if it has a connection to AC delco/if it has been set up with some sort of an asian account to pull down firmware files. Here, got a feeling that you would need to get a one day subscription in order to pull down the firmware from GM, but want to see if it can still used firmware files that have been stored without needing a SDS account.
Hence if you do need an account to pull firmware files since you can't find them elsewhere, you want to pull down all the firmware file for your car and store them when you do have that one day account.
As for cycling the ABS pump with either a tech II or tech2win with the vxdiag vcx nano gm, and note that you do the procedure before you power flush/bleed, then after as well.
https://www.youtube.com/embed/XsaJ6lkWu7c
also, since the abs pump is not used much for most drivers, and you do have a tech II/ vxdiag vcx nano gm on hand, not a bad idea to run the pump about twice a year. This will cycle the stagnant fluid out of the pump, to refill it with fluid that has been recirculating; but still do a complete power brake flush around every two years still.
This from China OBD Diagnostic Online Supplier official blog:ABS Bleed: using Tech II or VXDIAG VCX NANO GM
On tech2win, although the op is stating that its working in 64 bit mode, really want to go through it to double check if it needs to run in win 7 compatible mode for everything to work "correctly" instead.
GDS2 is run in VM mode under a XP shell so that should be trouble free, but need to check out SDS to see if it has a connection to AC delco/if it has been set up with some sort of an asian account to pull down firmware files. Here, got a feeling that you would need to get a one day subscription in order to pull down the firmware from GM, but want to see if it can still used firmware files that have been stored without needing a SDS account.
Hence if you do need an account to pull firmware files since you can't find them elsewhere, you want to pull down all the firmware file for your car and store them when you do have that one day account.
As for cycling the ABS pump with either a tech II or tech2win with the vxdiag vcx nano gm, and note that you do the procedure before you power flush/bleed, then after as well.
https://www.youtube.com/embed/XsaJ6lkWu7c
also, since the abs pump is not used much for most drivers, and you do have a tech II/ vxdiag vcx nano gm on hand, not a bad idea to run the pump about twice a year. This will cycle the stagnant fluid out of the pump, to refill it with fluid that has been recirculating; but still do a complete power brake flush around every two years still.
This from China OBD Diagnostic Online Supplier official blog:ABS Bleed: using Tech II or VXDIAG VCX NANO GM
loading..
2018年3月15日星期四
Buy Tech 2 China clone for good quality & good price
GM Tech 2 scanner rental?
The original Tech 2 scan tool is too expensive for you? Want a Tech 2 scanner rental for use? If so, Tech 2 clone should be a good choice for you because of the flowing reasons:
- clone tech 2 for sale: $200-$350 around, much more cheaper than the genuine
- the same functions as the genuine: diagnosis, service programming system (SPS), key programming...
Tech 2 clone problems: clone vs original?
Left -clone; right -real
Tech 2 clone problems: which tech 2 clone is the best?
There are many versions of tech 2 programmer clones from China.
GM Saab Opel Suzuki Holden Isuzu tech 2 for sale
| |||||||
Item No.
|
Weight
|
Card incl.
|
Package
|
Quality
|
Hot Selling
|
All Tech2 scanners come with the Same function
SP23-B and SP23-B3 have the best quality; but SP23-B3 comes with a better box (carton) | |
SP23-B3
|
3.15 KG
|
C Card (SO22-C)
|
Carton Box
|
Best & Hottest
|
★★★★★
| ||
SP23-B
|
9.10 KG
|
C Card (SO22-C)
|
Carry Plastic Box
|
Best
|
★★★★★
| ||
SP23-C
|
9.10 KG
|
C Card (SO22-C)
|
Carry Plastic Box
|
Good
|
★★★★
| ||
SP23
|
9.10 KG
|
D Card (SO22-D)
|
Carry Plastic Box
|
Good
|
★★★
| ||
SP23-1
|
4.55 KG
|
D Card (SO22-D)
|
Carton Box
|
Best Price
|
★★★★★
| ||
After Sale Service: One Year!! Enough Stock Ready Ship!
|
Tech 2 clone problems: the best solution of GM diagnostics?
GM MDI vs VXDIAG NANO GM vs Tech 2 scan tool
Products
| |||
Picture
|
| ||
software
|
GDS 2 (2011)
Tech2 Win
|
GDS 2 (2014)
|
TIS2000
SPS
|
Need computer
|
Yes, it’s PC-based.
|
Yes, it’s PC-based.
|
Basic diagnostics: on-board
TIS2000: PC-based
|
System
requirement
|
Package software: Win XP only
v2016.11 software: Win 7
|
Win7 64bit / 32 bit
Win8 64bit
|
Win XP for TIS2000
|
Language
|
Multi-Language
|
Multi-Language
|
Multi-Language
(depends on vehicles)
|
WIFI
|
WIFI
|
YES, VXDIAG GM has WIFI version and wired version (USB connection)
|
No, only wired connection.
|
Update
|
Firmware updatable
|
Firmware updatable
Software updatable
|
Update via 32MB Card
|
Activation
|
Yes, MDI need activation.
|
No need to activate
|
No need to activate
|
Diagnosis
|
wireless basic diagnostic
|
brand-specific diagnosis
|
basic diagnosis
|
Programming
|
-wireless online programming
-offline programming ,such as European Chevrolet, Opel, but not for all cars
|
GM TIS2WEB online Service Programming System (SPS)
|
Offline programming with TIS2000 on SAAB/OPEL (-2008)
|
Supported protocols
|
UART, Class 2, KWP2000 and GMLAN (CAN)
|
CAN, UART, KW2000, Class2, GM LAN, etc.
|
CANdi interface(NOTE 1)
|
Supported vehicles
|
vehicles from 1990-2014
GM,
Opel,
Chevrolet,
Saab,
Australia Holden (2010-2012)
|
Vehicles to 2015
GM,
OPEL
|
vehicles from 1992-2013
GM,
SAAB,
OPEL,
UZUKI,
ISUZU,
Holden
|
Advantage
|
-can support software from original factory
-support offline & online programming
|
-cheap but with the same function as GM MDI
- WIFI and USB connection
-good for new cars
|
-cannot plug original software card, but can support original program
-easy to carry on
|
Conclusion
|
VXDDIAG VCX NANO GM wins!!!!!!!!!!!!!!
|
Gm tech 2 software for pc:
tech2web
tech2win
loading..
订阅:
博文 (Atom)